1 Item

Warning: Last items in stock!

General Air Module 2-6S, Vario GRAUPNERHoTT (33611)


€77,95 tax incl.


Reduced price!

General Air Module 2-6S, Vario GRAUPNERHoTT (33611)



Dimensions (LxWxH) 41 (48) x 44 (56) x 16  mm
All-up weight, approx. 31  g
Operating voltage 3,6 ... 8,4  V
General sensor for Graupner HoTT receiver and models with internal combustion or electric motor.
  • Vario with altitude signals plus climb and drop signals as well as additional warning thresholds for min. altitude, max. altitude, climb, and drop speeds in two stages
  • Altitude display (- 500 … + 3000 m) and storage of min. and max. altitude
  • 2x temperature and voltage measurements with warning thresholds for min. and max. voltage and min. and max. temperature
  • Individual measurement with warning threshold for min. voltage
  • Voltage, current, and capacity measurement with warning threshold for min. and max. voltage, max. capacity, and max. current
  • Current limiting programmable
  • Messurment of the current with shunt resistors 2x 1 mOhm parallel = 0.5 mOhm
  • Rpm measurement and warning threshold for min. and max. rpms
  • Fuel measurement with warning threshold in 25% steps
  • Warning time can be set to: OFF, 5, 10, 15, 20, 25, 30 seconds, always
  • Warning repeat time can be set to: always, 1, 2, 3, 4, 5 minutes, once
Important Note when using the modules 33600, 33601, 33610, 33611 and 33620:
Do not carry out any programming work on the sensors while the model is flying, otherwise there is a real risk that your model will fly out of control while you are not concentrating on it!
If your model is fitted with two or more receivers, it is absolutely essential that you do not carry out programming work during a flight, as this can alter the settings in the receivers to which no telemetry equipment is connected; in the worst case this could result in the model crashing! For this reason always carry out programming on the ground, and check that only the receiver with connected sensors is powered on.
Connections and Technical data Vario:
  • 2x temperature optionally selectable from 0 to 120°C or 200°C and voltage measurement up to 60 V DC
  • 1x rpm measurement up to 100 000 rpm with two-blade propeller
  • 1x speed controller/ servo input, 1x input rpm control, 1x speed controller / servo output for rpm control
  • 1x current and voltage and capacity measurement up to 40A (60A for 1 s) and up to 30V
  • 1x single-cell monitoring for 2 - 6S lithium batteries (LiPo, LiIo, LiFe)
  • 1x receiver power supply input and output
  • 1x telemetry connection for receiver
  • 1x fuel sensor 0%/25%/50%/75%/100%