13453

SG570

1 Item

Waarschuwing: nog maar 1 stuk op voorraad.

KIT GOBLIN 570 YELLOW/RED (SG570)

€599,00

€646,00 incl. btw

-€47,00

In prijs verlaagd!

KIT GOBLIN 570 YELLOW/RED (SG570)

General Specifications:

  • Main rotor diameter: 1278 mm (with 570 mm blades)
  • FBL System
  • Main blade length: 550 to 575mm
  • Tail rotor diameter: 260 mm
  • Tail blade length: 95 mm
  • Main shaft diameter: 10 mm
  • Spindle shaft diameter: 8 mm
  • Weight including electronics: 2400 g (excluding batteries).

SPECIAL FEATURES:

  • Full carbon boom
  • Battery tray 6S and 12S
  • Inside carbon rod
  • Dampened tail system

Kit Includes:

  • 21T motor pulley (other pulley sizes available)
  • 1 battery tray with straps
  • 570 mm main blades
  • 95 mm tail blades

Electronic Specifications:

  • Cyclic Servos: Standards size 40mm
  • Tail Servo: Standard size (40mm)
  • Typical Speed Controller:
    • 6S 100A
    • 12S 80A
  • Maximum motor size: 4025 size (52 mm diameter, 56 mm height)
    • 6S 1000-1400 Kv
    • 12S 500-700 Kv
  • Battery compartment: 
    • 6S 5000/5500 mAh.   Max dimension 50x60x200mm
    • 12S 2600/3300 mAh.  Max dimension  50x45x280mm

The following motor pulleys are available:

  • H0215-16-S-16T Pinion = ratio 12.9:1
  • H0215-20-S-20T Pinion = ratio 10.3:1
  • H0215-17-S-17T Pinion = ratio 12.2:1
  • H0215-21-S-21T Pinion = ratio 9.8:1
  • H0215-18-S-18T Pinion = ratio 11.5:1
  • H0215-22-S-22T Pinion = ratio 9.4:1
  • H0215-19-S-19T Pinion = ratio 10.9:1
  • H0215-23-S-23T Pinion = ratio 9:1
All these motor pulleys are for a 6 mm motor shaft. Each pulley includes an adapter for 5 mm motor shafts.
 
  •  HPS (High Precision Head System)
  • 10mm high strength steel main shaft
  • 8mm high strength steel spindle shaft

 

  • 2mm carbon frames

 

  • Stronger main gear, Gates GT3 motor belts, 9 mm one-way bearing

 

  • Strong landing gear. Landing gear mounting brackets do not require bolts to be installed. The brackets are a break point during a crash preserving frames and other important parts
  • Aluminum tail case for increased stiffness.
  • Dampened tail system for increased vibration tolerance
  • 6S and 12 S battery
  • Battery tray with lock system.
  • Nylon bolt break-away system to preserve the boom during a cras
  • Aluminum ESC support

 

 
  • Standard size cyclic servos
  • Standard size tail servo
  • Canopy saver, protects the canopy edges from scuffing.
Aandrijving Electro Helikopter
Helikopter Grootte 3 - Groot (Vanaf 100cm)